{"id":4758,"date":"2023-05-16T14:56:53","date_gmt":"2023-05-16T14:56:53","guid":{"rendered":"https:\/\/northamericanmining.com\/?p=4758"},"modified":"2023-05-16T14:56:55","modified_gmt":"2023-05-16T14:56:55","slug":"modularization-in-mineral-processing","status":"publish","type":"post","link":"https:\/\/northamericanmining.com\/index.php\/2023\/05\/16\/modularization-in-mineral-processing\/","title":{"rendered":"Modularization in mineral processing"},"content":{"rendered":"\n

The benefits offered by modularization are provoking increased interest from the mining industry. Despite it being around for several decades now, the concept is still misunderstood. So, what exactly is modularization \u2013 and what are the practical considerations when applying it to mineral processing? <\/em><\/p>\n\n\n\n

By Jonathan Rowland<\/em><\/p>\n\n\n

\"\"
Interest in modular mineral processing plants is growing due to their flexibility, scalability, and cost effectiveness.<\/em><\/figcaption><\/figure>\n\n\n

We are of the opinion that it is time for a paradigm shift in the [mining] industry,\u201d wrote the authors of a 2016 thought piece from Deloitte Mining. That paradigm shift was to be achieved by \u201cintroducing smaller, scalable and modular processing plants, which are suited for the current distressed industry.\u201d <\/p>\n\n\n\n

Calls to shift paradigms might look good in headlines \u2013 and in reports from management consultants \u2013 but they very rarely represent calls to a truly novel approach. And so it was with this piece. Modularity is a long-established approach in various industries: from modular accommodation units on offshore oil rigs to modular cement grinding plants. Nor is it a case of the concept being only recently adopted into the mineral processing sector. As Ivor Jones, general manager of the Modular Division at ADP, told North American Mining, it has been around in the mining industry for several decades. <\/p>\n\n\n\n

\u201cWe have been building modular plants since the late 1990s,\u201d the ADP executive said. \u201cAnd there were companies before us that were building modular dense media separation (DMS) plants going back to the late 1980s. It has been particularly prominent in the marine diamond business, much of which is driven out of Cape Town, South Africa, where specialist fabricators are located close to the harbor to facilitate delivery of these preassembled units onto the ships.\u201d<\/p>\n\n\n\n

A wholly-owned subsidiary of Lycopodium, ADP offers EPCM\/EPC service offerings with a particular specialty in modular processing plants. Founded as Alluvial Diamond Projects in 1997, the company retains a strong presence in the southern African diamond industry with many of the major diamond houses \u2013 including De Beers \u2013 as clients. The company is also active in the precious metals sector and has expanded its geographic footprint with projects undertaken as far afield as Australia, Brazil, Canada, India, Indonesia, and Norway, as well as many African countries. <\/p>\n\n\n\n

Modular mineral processing may be more venerable than the Deloitte authors imagined. But it is perhaps true to say that modular concepts have gained a higher profile more recently as the benefits are more widely recognized. <\/p>\n\n\n\n

\u201cModular plants have a variety of advantages that can be tailored according to individual project requirements,\u201d explained Gustavo Brasil, business development manager at CDE, based in Austin, Texas. \u201cThe application of modular processing plants in the mining industry has become increasingly popular due to their flexibility, scalability, and cost effectiveness. The modular design also allows for easy customization and expansion, enabling mining companies to quickly adapt to changing mineral processing needs and site-specific conditions.\u201d <\/p>\n\n\n

\"\"
Modular plants are set to play an essential part in the mining industry\u2019s future, according to Gustavo Brasil of CDE Group.\u00a0Pictured: an AggMax 250 at Hawaiian Cement.<\/em><\/figcaption><\/figure>\n\n\n

So, what is a modular mineral processing plant?\u00a0<\/strong>
Before going further into some of the benefits, however, it will be helpful to spend a moment defining what we mean by a modular mineral processing plant. The key concept is prefabrication and preassembly before being sent to site.\u00a0<\/p>\n\n\n\n

\u201cUnlike traditional mineral processing plant, which are typically large, monolithic structures, modular plants are designed using prefabricated modules, which are assembled onsite to create a flexible and customizable processing plant,\u201d said CDE\u2019s Brasil. \u201cEach unitary process in the modular plant is bundled or divided into specific blocks, with the structural requirements integrated into these blocks.\u201d <\/p>\n\n\n\n

These blocks or modules are often (but not always) based on standard-size containers to facilitate shipping, especially when dealing with remote mine sites. \u201cModular plants are more easily transportable than traditional plants, making them a good option for companies operating in remote or challenging environments,\u201d continued Brasil. <\/p>\n\n\n\n

That said, when modules are fabricated closer to site \u2013 such as with the marine diamond modules mentioned earlier \u2013 or when transport routes allow it, module size can be larger.<\/p>\n\n\n

\"\"
Modular plants offer quicker onsite construction time and can<\/em>
thus speed-up start of production \u2013 and revenue generation.<\/em>
Pictured: a FLEXSERIES from Mineral Technologies.<\/em><\/figcaption><\/figure>\n\n\n

Why go modular?\u00a0<\/strong>
According to Matt Urquhart, regional manager, North America, at Mineral Technologies, the benefits of modular mineral processing plants include:<\/p>\n\n\n\n

    \n
  • Quick and easy site construction, condensing
    commissioning time and improving speed to market.<\/li>\n\n\n\n
  • Compact design. <\/li>\n\n\n\n
  • Agile ramp-up and expansion of production.<\/li>\n\n\n\n
  • Faster operationality.<\/li>\n\n\n\n
  • Reduced site impact, making it easier to return it to pre- mine conditions.<\/li>\n<\/ul>\n\n\n\n

    Additionally, \u201cwhen working at small to moderate scale and when the orebody and flowsheet are well understood, project studies and design phases can be accelerated using pre-engineered, fully-costed modules,\u201d Urquhart added. <\/p>\n\n\n\n

    One of the major reasons to look at modular construction is to \u201creduce construction time on site,\u201d agreed Jones. This in itself has a number of benefits. Firstly, time spent onsite is significantly more expensive than time in the workshop. Modular plants also reduce the need for massive civil engineering work: for smaller plants, the need for civils can be eliminated altogether, although larger-capacity modular plants may still need some.<\/p>\n\n\n\n

    \u201cWith traditional construction methods, you will typically see assembly rates of about 3-5 ton per day,\u201d continued Jones. \u201cWhen dealing with modular construction, we estimate that to be more like 15-20 tons per day or higher. Modular construction also requires a lower level of skilled labor on site, as much of the complex assembly is done in the workshop.\u201d<\/p>\n\n\n\n

    In the negative column, design time for modular plants is generally slightly longer, as the interfacing between blocks must be correct before they ship. Plants are often preassembled and pre-commissioned in the workshop before being transported to site to ensure functionality (although this is also true of traditional plants). And modular plants will often require more steel. This will all tend to increase the price vis-\u00e0-vis conventional mineral processing plants \u2013 but not enough to offset the cost reduction gained from the shorter construction time and the financial opportunity of getting into production earlier. <\/p>\n\n\n\n

    On balance, \u201cmodular plants allow for quicker and easier construction and have the potential to significantly shorten the mine development cycle,\u201d said CDE\u2019s Brasil. \u201cModular plants can thus be commissioned and start processing minerals much more quickly than traditional mineral processing plants, accelerating the point at which the project begins to generate revenue.\u201d<\/p>\n\n\n\n

    In addition, modularity \u201callows for easier expansion or modification as mining conditions change of time,\u201d continued Brasil, \u201creducing the need for costly and time-consuming plant redesigns. This flexibility can help mining companies optimize their operations and increase productivity, which can also help shorten the development cycle.\u201d<\/p>\n\n\n\n

    Modular plants also have specific benefits in terms of supporting mining companies to extract value from existing tailings deposits. \u201cModular processing plants can be designed and configured to process tailings in a way that maximizes the recovery of valuable minerals, while minimizing waste and environmental impact,\u201d explained Brasil. \u201cThe flexibility of modular plants allows for the efficient and cost-effective processing of tailings deposits of varying sizes and compositions. Mining companies can therefore unlock additional value from their operations, without the need for significant new investment in infrastructure.\u201d <\/p>\n\n\n\n

    By processing tailings dams, companies also reduce the environmental and safety risks associated with such facilities. \u201cOverall, the ability to extract value from existing tailings deposits using modular mineral processing plants represents a significant opportunity for mining companies to improve their sustainability and profitability,\u201d concluded the CDE expert.<\/p>\n\n\n

    \"\"
    A 30-tph modular DMS plan<\/em>t from ADP. Located in northeast
    Angola, the plant is used for diamond recovery. Photo: ADP<\/figcaption><\/figure>\n\n\n

    Implementing a modular minerals processing plant<\/strong>
    The steps to implementing a modular minerals processing plant are not dissimilar to those involved in traditional installations:\u00a0<\/p>\n\n\n\n

      \n
    • Project scoping. This first step defines the desired performance of the plant, including throughput and mineral product specification. Combined with the long-term vision of the mining company involved, this helps to determine the size and configuration of the modular plant. <\/li>\n\n\n\n
    • Design and engineering. After the scope of the plant
      is defined, the plant is designed and engineered. This
      includes developing a detailed process flow diagram, as well as designing the individual modules and supporting infrastructure. <\/li>\n\n\n\n
    • Fabrication and assembly. Modules are then fabricated off-site in a controlled environment, which helps ensure high quality and consistent production standards. When the modules are complete, they are shipped and assembled onsite. Before shipping, the complete plant may be pre- assembled to ensure it meets specifications. <\/li>\n\n\n\n
    • Commissioning and start-up. After the plant has been
      assembled at the mine site, the modules are tested
      individually, and as a complete system, to ensure it is operating as designed. <\/li>\n<\/ul>\n\n\n\n

      Throughout this process \u201cit is important to work closely with all stakeholders to ensure that the plant is designed and implemented in a way that meets the needs of the specific mine,\u201d said Brasil. \u201cOngoing communication and collaboration are critical to ensure that the plant remains optimized for performance and that any necessary modifications or upgrades are made in a timely and effective manner.\u201d <\/p>\n\n\n\n

      Modularization in practice<\/strong>
      CDE recently undertook a project involving a client that had recently acquired a diverse industrial silica mining operation. \u201cThe company was seeking to future-proof its operations and partnered with us in 2019 to supply three modular processing plants,\u201d said Brasil. \u201cThe performance of these \u2013 coupled with an aggressive expansion plan \u2013 led the company to acquire a fourth plant and additional modules to upgrade the original three in 2022.\u201d<\/p>\n\n\n\n

      Through the project, CDE worked with the customer to optimize its operations to reduce both CAPEX and OPEX, as well as to better understand its mines and the direction of the market. As a result, one of the modular plants was moved, while the company tripled the processing capacity of another. Ultimately, the customer has ended up with five plants, each tailored to specific needs. <\/p>\n\n\n\n

      \u201cThe case study is an example of the potential that modular plants offer,\u201d concluded Brasil. \u201cBy providing flexibility, scalability, and customization, modular plants can help mining companies increase productivity, while reducing costs.\u201d <\/p>\n\n\n\n

      Another case study was provided by Mineral Technologies, which provides an off-the-self modular mineral processing solution, with capacities of 5-250 tph, known as FLEXSERIES. The company was engaged by WIM Resource in Australia to deliver a process solution at its Avonbank test-pit project, which was aimed at demonstrating extraction of heavy mineral concentrate. One of the main challenges of the project was the fine particle sizes of 50-60 microns.<\/p>\n\n\n\n

      The solution ultimately comprised a 10-tph pilot plant that could be easily relocated on flatbed semi-trailers or shipped as break bulk (but not containerized). The plant incorporated MG12 and HG10i spirals operating in a four-stage (rougher, scavenger, cleaner and recleaner) circuit within a footprint similar in size to a standard tennis court (excluding feed hopper and transfer conveyor). <\/p>\n\n\n\n

      \u201cWorking within WIM Resource\u2019s challenging delivery schedule, we were able to develop a process flowsheet and design a relocatable modular plant that could be quickly assembled and commissioned onsite,\u201d said Mineral Technologies\u2019 Urquhart. \u201cThe plant helped confirm separation of heavy minerals \u2013 including titanium, zircon, and rare earths \u2013 from the ore in line with required grade and recovery specifications. <\/p>\n\n\n\n

      Modularization can also play a role at larger mineral processing operations \u2013 and this goes back to the importance of communicating with the customer to fully understand their process, as Jones continued. \u201cTypically, when you talk required tonnages, you are talking about the front-end of the plant. But that tonnage does not necessarily carry through the whole plant.\u201d<\/p>\n\n\n\n

      Jones went on to use the example of a lithium processing facility to make the point. \u201cA recent project we worked on had a head feed of 400 tph \u2013 so beyond the top end of what is cost-effective for modularization. But after crushing, the head feed was classified into smaller three streams: a 150-200-tph coarse stream, a 200-tph fine stream, and a 50-60-tph ultra-fine stream. These all fall within the scope of cost-effective modularization. The project could thus take a hybrid approach with both traditional and modular elements to provide an optimized solution.\u201d <\/p>\n\n\n\n

      Is the future modular?\u00a0<\/strong>
      The future of modular mineral processing is \u201cbright,\u201d according to CDE\u2019s Brasil. \u201cModular plants are set to play a crucial role in the mining industry going forward, as the industry continues to evolve and needs grow for innovative, flexible, and efficient solutions. Modular plants also have the potential to reduce the environmental impact of mining through improved efficiency, reduced waste, and more sustainable use of resources.\u201d<\/p>\n\n\n\n

      Yet it is also important to note that modular processing plants are not a panacea. \u201cWe came up against this attitude recently in a project in Angola, where the client wanted to modularize but, when we looked into it, we realized the equipment being selected was well beyond what could be broken down into easily-transportable modules,\u201d noted ADP\u2019s Ivor Jones. \u201cUltimately, we went back to the client and said this would be modularization for modularization\u2019s sake \u2013 and not cost effective; it wouldn\u2019t deliver the advantages that were being sought.\u201d <\/p>\n\n\n\n

      In short: there will always be sites that require traditional installations. However, in the mining industry\u2019s continued battle to supply essential mineral products, economically and sustainably, in sufficient quantities, despite ever-more complex ores, modularization is likely to be an increasingly important weapon in the industry\u2019s arsenal.<\/p>\n","protected":false},"excerpt":{"rendered":"

      The benefits offered by modularization are provoking increased interest from the mining industry. Despite it being around for several decades now, the concept is still misunderstood. So, what exactly is modularization \u2013 and what are the practical considerations when applying it to mineral processing?  By Jonathan Rowland We are of the opinion that it is time for a paradigm shift…<\/p>\n","protected":false},"author":8,"featured_media":4762,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_themeisle_gutenberg_block_has_review":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[4],"tags":[1175,2017,2018,573,2019,2020,613,2016],"coauthors":[1635],"class_list":["post-4758","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-features","tag-cde","tag-deloitte-mining","tag-dense-media-separation","tag-mineral-processing","tag-mineral-processing-plants","tag-mineral-technologies","tag-mining-industry","tag-modularization"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t