![\"\"](\"https:\/\/northamericanmining.com\/wp-content\/uploads\/2025\/11\/BioFleet-Wahl.png\")
<\/figure>\n<\/div>\n\n\nThese proven hydraulic fluids are available in ISO 22, ISO 32, ISO 46, and ISO 68 weights to suit a wide range of fleet, marine, and industrial applications such as vane, piston, and gear pumps.<\/p>\n\n\n\n
Bio-Fleet Hydraulic Fluids meet EPA 21013 Vessel General Permit (VGP) guidelines for Environmentally Acceptable Lubricants (EALs) and should be used in hydraulic systems where low toxicity, biodegradability, and non-bioaccumulation properties are required. They are safer for both the environment and the employees working with and around them. They also have a significantly higher flash point than traditional hydraulic fluids, so they are much safer around hot running equipment.<\/p>\n\n\n\n
With oxidation performance comparable to full synthetics, this is one of the safest hydraulic fluids for the environment. Ideal for stationary or mobile environments, like balers, compactors, or collection vehicles, these super high Viscosity Index (VI) fluids are proven in systems up to 10,000 psi and in systems with ultra-fine filtration. To ensure performance and long life, Renewable Lubricants developed the stringent IsoGreen filtration standard, which meets or exceeds the Rexroth pump guidelines for hydraulic fluids. Non-toxic, zinc-free formulations contain no heavy metals. In addition to enhancing performance, Renewable Lubricants (RL) helps companies achieve their sustainability goals. They are ideal for use in all types of hydraulic systems, including trash compactors, collection vehicles, balers, compactors, shredders, pumps, and other OEM equipment.<\/p>\n\n\n\n
With a higher VI than synthetics (Energy Conserving Formulas), Bio-Fleet fluids have improved thermal shear stability and increased load capacity. Their extremely low volatility increases the flash and fire safety features, making them safer to use. A direct replacement for mineral oil-based hydraulic fluids, they are ideal for hydraulic systems where low toxicity, biodegradability, and non-bioaccumulation properties are required.<\/p>\n\n\n\n
These patented biobased hydraulic fluids are formulated to perform in high- and low-pressure hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam, and demulisibility properties. With patented antioxidants (stabilized), these biosynthetics provide improved performance in oxidation stability over standard plant\/vegetable\/HETG and unsaturated HEES type fluids. They are highly inhibited against moisture and rusting in both fresh and seawater, and pass A and B sequences of the ASTM D-665 Turbine Oil Rust Test. They also provide excellent water separation as shown in ASTM D-1401 Demulsibility Test. Formulated to provide a longer seal life with reduced oil leakage, this environmentally friendly, zinc-free product meets or exceeds high-pressure pump requirements.<\/p>\n\n\n\n
Very little wear was encountered in field studies and in accelerated pump tests using biobased formulations in Denison T-5D, Vickers 20VQ, 35VQ-25 (M-2950-S), and V-104C (ASTM D-2882), Vickers I-286-S pump stand tests and pressures and temperatures ranging from 2000 to 3000 psi and from 150\u00b0to 210\u00b0F. Anti-wear performance exceeds requirements for US Steel 126, 136, and 127, load stage 10 in the FZG (DIN 51354) and GM (LS-2).<\/p>\n\n\n\n